6.OSD - Camera Setting
Some products may not be available in your country, please contact our distributor for more details
Some products may not be available in your country, please contact our distributor for more details
6.OSD - Preset, Scan
15
ADVANCE SETTING
AE MODE
AUTO
SHUTTER
N/A
IRIS
N/A
BRIGHT
N/A
WB MODE
AUTO
R GAIN
N/A
B GAIN
N/A
HI-RESOLUTION
OFF
BACK
EXIT
Advanced Setting
Under the advanced setting, you can make
improvements tothe image quality depending on
different environmental conditions.
Auto Exposure mode. Depends on the light
condition in the surveillance area, you can set the AE in
different modes and adjust the parameters, such as
shutter speed, iris factor and brightness for the best
image quality.
White Balance mode, a
image improvement
based on DSP processing. You can also adjust the Red-
Gain or Blue-Gain to change the color tone.
Switch between 470-530 TVL (only
with FCB-1010P)
AE MODE:
WB MODE:
n
Hi-RESOLUTION:
ZOOM SPEED
HIGH
DIGITAL ZOOM
ON
BLC MODE
OFF
SLOW SHUTTER
ON
IR CUT FILTER
AUTO
LINE SYNC
OFF
WDR MODE
ON
ADVANCE SETTING
BACK
EXIT
CAMERA SETTING
Camera Setting
In the camera setting menu, you can access camera module
related settings. Please note that depending on module’s
capability, some functions may not be available. Please
contact your local sales representative for detailed
information.
Defines the speed whith which zoom
functions are performed.
Activates or deactivates the camera
module’s digital zoom function.
Selects the Back Light Compensation mode
which improves the image when an object has strong back
light.
Activates the Slow Shutter function of the
camera, which provides a higher light sensibility in low-lit
environments.
Enables the removal of Infrared Cutter
Filter (IRC), also known as “DAY/NIGHT” mode. Enabling
the IRC the camera turns into Black/White mode and has
higher sensibility to low-light situations or turns on the IR-
light depending on the light condition. Selectable between
On, Off or Auto. Only available on camera modules with IRC
function.
Enables and disables Line Synchronization.
ZOOM SPEED:
DIGITAL ZOOM:
BLC MODE:
SLOW SHUTTER:
IR CUT FILTER:
,
LINE SYNC:
Function Setting
In function setting menu, you can define and activate
different PTZ funcitons, such as preset points, auto
scan, tours and patterns. Presets and tour functions
can also be set or activated directly from the
keyboard without entering the OSD Menu. Please
refer to the keyboard’s manual for operation details.
EDIT PRESET LABEL
LABEL
BACK
EXIT
：
MAIN ENTR,
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
Presets
PRESET NUMBER:
SET PRESET:
SHOW PRESET:
CLEAR PRESET:
EDIT PRESET LABEL:
supports up to 128 presets. The
number can be selected from 0 to 128.
Defining the preset points directly in
OSD by entering this menu item and move the PTZ.
Press IRIS-OPEN key on the keyboard to save. If the
preset is pointed within digital zoom, it will
automatically go back to the max. optical zoom range
in order to provide the best image quality.
Moves to the current preset point.
Clears the current preset.
For the current preset, you
can define a name which will be displayed on the
operation screen once the preset is called. Please
choose the preset number first. The avaialbe
characters are: 0-9, A-Z, <,>,. and space.
PRESETS
P R E S E T N U M B E R
0 0 1
S E T P R E S E T
S H O W P R E S E T
C L E A R P R E S E T
E D I T P R E S E T L A B E L
B A C K
E X I T
Scan
SCAN NUMBER:
SCAN SPEED:
SET LEFT LIMIT:
SET RIGHT LIMIT:
CLEAR SCAN:
RUN SCAN:
EDIT SCAN LABEL:
The SCAN function moves the PTZ between 2-
predefined points with constant speed. The following
parameters can be set:
Cruising speed between the points.
Defines the left point.
Defines the right point.
Deletes the scan setting.
Starts the scan function.
Sets the name for the scan.
Supports up to 4 scans.
SCAN
SCAN NUMBER 01
SCAN SPEED
63
SET LEFT LIMIT
SET RIGHT LIMIT
RUN SCAN
EDIT SCAN LABEL
BACK
EXIT
CLEAR SCAN
16
