5
4. Operating instructions
Pairing the trigger with the receiver
Having connected the receiver to the mains, press the “CODE” button on the receiver and hold it pressed for 1 second. The
red LED indicator on the receiver will start blinking and it will keep blinking for 10 seconds. During that time press the “CODE”
button on the trigger unit. When the two devices are paired correctly, the blue LED indicator on the receiver will blink three
times quickly.
Power on
Press CODE on receiver
for 1 second
Red light on receiver
flashes slowly for 10 sec.
Press CODE
on the trigger
Blue light on receiver
flashes quickly 3 times
within 10 seconds
Receiver paired
Setting up the trigger to work with the projector
Having connected the trigger to the mains, press the “SET” button and hold it pressed for 3 seconds. The LED indicator on the
trigger will start blinking. It will keep blinking for 10 seconds and will also sound a single short beep. Next, turn the projector on.
The trigger will remember the necessary settings automatically.
As soon as the trigger has been set up to work with the projector correctly, the LED indicator on the trigger will blink 3 times
and the trigger will sound 3 short beeps.
If there is only one beep and the LED indicator lights up only once, that will mean the setting has failed.
Power on
Press SET on receiver
for 3 sec.
Red light on receiver
flashes slowly for 10 sec.
Turn on
the projector
Led on trigger flashes quickly 3 times
with buzzer 3 times beep
Led on trigger flashes 1 time
with buzzer 1 time beep
within 10 seconds
Buzzer
buzz
BEEP
Setting
successfull
Setting
failed
BEEP
BEEP
3x
1x
If the devices have been set up correctly, they will interact with each other as follows:
As soon as the projector has been turned on, the projection screen will be lowered automatically.
As soon as the projector has been turned off, the projection screen will be rolled up automatically.
