4
Avtek 1EVA11
Wireless projection screen trigger
1. Features
• Detects projector startup and sends signal to controller screen.
• Compatibile with all Avtek electric screens:
“Video/Cinema/ Business Electric” series and Wall Electric
equipped with the 1EVA06 controller.
• Integrated overvoltage protection sensor for better safety
• High resistance to interference
3. Installation and setup
Important safety precautions
While installing the product, please make sure you follow all the applicable electrical standards and the following safety precautions:
• Before you start any (re)installation or maintenance work, always disconnect the product from the mains first.
• Use all appropriate electrical safety measures to protect electrical components of the product from damage by electrostatic discharge.
• Make sure that the electrical ground wire is correctly connected.
CODE:
that button is present on the receiver and on
the trigger unit. Use these buttons to pair the trigger
and the receiver.
SET:
a button on the trigger unit. Use that button to set
up the trigger to work with your projector.
PL
wireless trigger
2. Specification
Model
Power
Supply
Temperature
Transmit
Power
Maximum
load
Operating
frequency
Power consumption
in stand-by mode
AC
512‑02
AC 230 V
50 Hz
(optionally: AC
120 V 60 Hz)
‑20°C ~ +55°C
≤ 10 mW
≤ 1000 W
433.92 Hz
≤ 1 W
LED indicator
projector power cable
Receiver
Power input: AC 230 V 50 Hz
(optionally: AC 120 V 60 Hz)
CODE button
SET button
