Avtech H.265 NVR, Руководство пользователя

Страница: 31 / 94

MAIN MENU
26
267
6.1.2 DEVICE
DEVICE
CHANNEL TITLE ENABLE CACHE TIME (MSEC) PORT
FORWARD
CAMERA
TYPE
ALARM OUT OSD TITLE OSD LOGO
CH1
81
AUTO 3
UP LEFT UP LEFT
CH2
82
AUTO 3
UP LEFT UP LEFT
CH3
83
AUTO 3
UP LEFT UP LEFT
CH4
84
AUTO 3
UP LEFT UP LEFT
APPLY
1) CHANNEL TITLE
Click to revise the channel title (up to 63 characters). The default title is the channel number.
2) ENABLE
Here shows the functions you can enable or disable:
Note:
The icons available depend on the camera you connected.
Icon Meaning Description
/
Time stamp
on / off
Display the recording time or not.
/
Edge recording
on / off
Enable this function to allow video recording directly to the microSD card
inserted in the IP camera when the NVR is disconnected to the camera and
unable to work properly.
/
Recording transfer
on / off
When edge recording is on, enable this function to allow the video saved in the
microSD card of the camera transferring to the NVR when the NVR is
reconnected to the camera and work properly.
/
Audio recording
on / off
Enable or disable audio recording for the selected channel if the connected
camera supports audio recording.
3) CACHE TIME (MSEC)
Drag the slide bar to change the cache time which determines the buffering time of playback.
Note:
To speed up the camera's operation, especially for the PTZ camera, you may set the CACHE TIME
(MSEC) as zero, but this change may debase the transmission quality.
4) PORT FORWARD
This function is used when you only want to see a single channel of this recorder remotely.
a) Set the port number for the channel in PORT FORWARD . The default value for CH1 is 81, and the
default value for CH2 is 82… etc. If you want to change the port number to other value, the range is from
1 ~ 65535.
b) Switch to to enable port forwarding.
The address of the channel will be “ http://recorder_address:port_number ”. Enter the address in
Internet Explorer, and see if you can access the device connected channel individually.
Note:
The user name and password are still required to access the device connected to the channel.
Make sure you know the user name and password to access the device. For details, please refer
to its user manual.
5) CAMERA TYPE
Here shows the camera type which is detected automatically.