MENU
DESCRIPTION
IMAGE
MOTION
ON (SOLID)
AREA SEL
Click
to set the area you want to detect. Up to four
areas could be configured.
The area will be masked and flashed when a motion
event occurs.
POSITION
Choose
ON
to show where the area selected in
AREA
SEL
is and set the size of the area:
1. Click
and change the
size by clicking
,
,
and
.
2. Click
again and
change the size by clicking
,
,
and
.
3. Click
again to finish and exit.
SENSITIVITY
Set the sensitivity for motion detection from
1
to
24
.
The larger the value, the more sensitive the detection.
COLOR
Choose the color for the selected area to show when a
motion event occurs:
RED
/
GREEN
/
BLUE
/
WHITE
.
TRANS
Choose the transparent level for the selected area from
1
~
8
when a motion event occurs.
The larger the value, the more transparent the area.
LSC
ON / OFF
Enable (
ON
) or disable (
OFF
) Lens Shading Correction
to correct the phenomenon of vignetting when the focal
length is short.
MIRROR
OFF / ON
Enable (
ON
) to turn the images horizontally based on
your installation situation when necessary.
BPC
DYNAMIC
BPC (bad point compensation) is used to compensate
dead pixels in the image.
Click
to further configure
DYNAMIC
/
STATIC W
(white) /
STATIC B
(black).
STATIC
W
STATIC
B
PICT ADJ
SHARPNESS
0 ~ 15
Set the level of sharpness to enhance the clarity of image
detail by adjusting the aperture and sharpening the
edges.
The more the value, the sharper the image will be.
CB GAIN
0 ~ 255
Adjust the blue value.
CR GAIN
0 ~ 255
Adjust the red value.
BLACK LEVEL
-128 ~ 127
Adjust the level of black.
GAMMA
0.4 / 0.45 / 0.5
Choose for gamma correction.
SYSTEM
CAM TITLE
OFF / ON
Set the camera ID.
LANGUAGE
ENG / CHI S
Select the language of the menu: English / Simplified
Chinese.
FORMAT
NTSC / PAL
Choose to change the video system format if needed.
EXIT
SAVE&END
Save all the changes made and exit.
NOT SAVE
Quit without saving.
RESET
Reset to factory default values.
Содержание DGC1125AXT
Страница 4: ......
