Avtech AVRF-4A-B, Инструкция по эксплуатации

Страница: 28 / 44

ALL PROGRAMMING COMMANDS
For more advanced programmers, a complete list of the available commands is given
below. These commands are described in detail in the “Programming Manual for -B
Instruments”. (Note: this manual also includes some commands that are not
implemented in this instrument. They can be ignored.)
Keyword Parameter Notes
OUTPut:
:[STATe] <boolean value>
:PROTection
:TRIPped? [query only]
[SOURce]:
:FREQuency
[:CW | FIXed] <numeric value>
[SOURce]:
:PULSe
:PERiod <numeric value>
:WIDTh <numeric value>
:DCYCle <numeric value>
:HOLD WIDTh | DCYCle
:DELay <numeric value>
:GATE
:TYPE ASYNC | SYNC
:LEVel HIgh | LOw
[SOURce]:
:VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <numeric value> | EXTernal
:PROTection
:TRIPped? [query only]
STATUS:
:OPERation
:[EVENt]? [query only, always returns "0"]
:CONDition? [query only, always returns "0"]
:ENABle <numeric value> [implemented but not useful]
:QUEStionable
:[EVENt]? [query only, always returns "0"]
:CONDition? [query only, always returns "0"]
:ENABle <numeric value> [implemented but not useful]
SYSTem:
:COMMunicate
:GPIB
:ADDRess <numeric value>
:SERial
:CONTrol
:RTS ON | IBFull | RFR
:[RECeive]
:BAUD 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200
:ERRor
:[NEXT]? [query only]
:COUNT? [query only]
:VERSion? [query only]
TRIGger:
28