Avtech AVR-AHF-1-B series, Инструкция по эксплуатации

Страница: 25 / 43


The arrow pointer should be pointing at the frequency menu item. If it is not,
press the MOVE button until it is.

Press the CHANGE button. The frequency submenu will appear. Rotate the
ADJUST knob until the frequency is set at 10 kHz.

The arrow pointer should be pointing at the “Internal” choice. If it is not, press
MOVE until it is.

Press CHANGE to return to the main menu.
5. To set the delay to 100 ns:

Press the MOVE button until the arrow pointer is pointing at the delay menu item.

Press the CHANGE button. The delay submenu will appear. Rotate the ADJUST
knob until the delay is set at 100 ns.

The arrow pointer should be pointing at the “Normal” choice. If it is not, press
MOVE until it is.

Press CHANGE to return to the main menu.
6. To set the pulse width to 500 ns:

Press the MOVE button until the arrow pointer is pointing at the pulse width menu
item.

Press the CHANGE button. The pulse width submenu will appear. Rotate the
ADJUST knob until the pulse width is set at 500 ns.

The arrow pointer should be pointing at the “Normal” choice. If it is not, press
MOVE until it is.

Press CHANGE to return to the main menu.
7. At this point, nothing should appear on the oscilloscope.
8. To enable the output:

Press the MOVE button until the arrow pointer is pointing at the output menu
item.

Press the CHANGE button. The output submenu will appear.
25