![background image](http://html1.mh-extra.com/html/avtech-electrosystems/avr-3he-b/avr-3he-b_instructions-manual_3034697024.webp)
4. To set the AVR-3HE-B to trigger from the internal clock at a PRF of 1 kHz:
The arrow pointer should be pointing at the frequency menu item. If it is not,
press the MOVE button until it is.
Press the CHANGE button. The frequency submenu will appear. Rotate the
ADJUST knob until the frequency is set at 1 kHz.
The arrow pointer should be pointing at the “Internal” choice. If it is not, press
MOVE until it is.
Press CHANGE to return to the main menu.
5. To set the delay to 1 us:
Press the MOVE button until the arrow pointer is pointing at the delay menu item.
Press the CHANGE button. The delay submenu will appear. Rotate the ADJUST
knob until the delay is set at 1 us.
The arrow pointer should be pointing at the “Normal” choice. If it is not, press
MOVE until it is.
Press CHANGE to return to the main menu.
6. To set the pulse width to 1 us:
Press the MOVE button until the arrow pointer is pointing at the pulse width menu
item.
Press the CHANGE button. The pulse width submenu will appear. Rotate the
ADJUST knob until the pulse width is set at 1 us.
The arrow pointer should be pointing at the “Normal” choice. If it is not, press
MOVE until it is.
Press CHANGE to return to the main menu.
7. At this point, nothing should appear on the oscilloscope.
8. To enable the output:
Press the MOVE button until the arrow pointer is pointing at the output menu
item.
24
Содержание AVR-3HE-B
Страница 34: ...PCB 158R4 LOW VOLTAGE POWER SUPPLY ...
Страница 35: ...PCB 197H HIGH VOLTAGE DC POWER SUPPLY DISCHARGE ...
Страница 44: ...PERFORMANCE CHECK SHEET 44 ...