AVTECH ELECTROSYSTEMS AVG-4A-B, Инструкция по эксплуатации

Страница: 21 / 38

will complete the full pulse width if the output is high, and then stop triggering. Pulses
are not truncated.
AMPLITUDE DRIFT
After setting a particular amplitude, it may take up to 3 minutes (typically) for the pulse
generator circuitry to reach thermal equilibrium. The initial amplitude may be up to
~10% less than the set amplitude until the circuitry has warmed up. For this reason,
amplitudes should be verified by oscilloscope measurements in applications where
accuracy important.
21