AVT
Ninja 250 Fender
Eliminator Install Guide
1)Remove the lower seat cover on each side of
the bike. First remove the Philips screw and
then carefully full on to cover at each corner to
get it to pop out.
2)Remove the seat by unscrewing the two 5mm
hex bolts(one on each side). Lift the seat out of
place.
3) Remove the rear seat with your motorcycle
key.
4) Removeboth the rear fairings. You will need
to remove: sixtotal 4mm hex bolt from both the
rear fairings.
5) Reach your hand into the fairing as pictured
and start to pop it out of place. Even steady
pressure works best. Lift the fairings out of the
way.
