EPS Series User Manual
Screen position adjustment:
All electric projector screens will be pre-adjusted. If adjustment is required, the switch is located at
the right hand side of the projector screen on the end cap. A Philips tip screwdriver will be required
for adjustment. Please do not forcibly pull down the screen. Two separate switches set the open and
close positions by turning the adjustment screw within, the open and closed stop positions can be
adjusted.
Control:
This projector screen is supplied with an in-line controller and a remote control to operate the
screen:
Maintenance:
Maintenance and service of the unit should not be required throughout the duty life of the product.
We recommend dusting the unit on regular basis using a dry microfibre cloth. Use a slightly damp
microfibre cloth to remove any stains with max 5% soap solution. Always ensure the surface is
completely dry before closing the screen.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the
end of its useful life. The goods must be disposed of according to your local council guidelines
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd.
