The
AVS-CASE-1
Synthesizer Case
User Guide
Thank you for purchasing from AvonSynth
Congratulations on your purchase of a brand new AvonSynth AVS-CASE-1
84HP Modular Synthesizer Case. We trust that it will both serve and
inspire you as you create beautiful music with it for years to come.
In order to get the most out of your case, please ensure that you read
this User Guide in its entirety so that you fully understand all of its
functionality, and that you follow all necessary safety directions during use.
Included in the Box
Page 1 of 4
1 x 84HP Modular Synthesizer Case
1 x IEC style power cord
Installation
Step 1: With your case unplugged, solidly mount it to a standard 19" rack or position it
in your performance area.
Step 2: With no modules yet inserted, test your power connection by plugging in a
standard IEC type power cable into the corresponding socket on the rear of
the unit, connecting that to a 230VAC power outlet. Set the rear switch to the
'on' position. If mains power is successfully reaching the power switch, it will
illuminate. If the red '+12V', '-12V', and '+5V' LEDs on the main board of the
unit are lit, power is connected correctly.
Step 3: With the power switched o
ff
, populate the unit with Eurorack compatible
synthesizer modules. Triple check the polarity of the power connectors before
connecting the power cords to your power supply. Ensure that the -12v line
marked on the back of the modules connect to the same end of the
fl
at-cable
that also connect to the -12v line on the power supply.
Step 4: Power up your system and start patching!
www.AvonSynth.com
