Avonic CM55-VCU, Руководство пользователя

Страница: 15 / 24

www.avonic.eu
15
PTZ TRIG AF: Turn ON / OFF the auto focus
when the camera pans / tilts / zooms.
POWER UP ACTION: PRESET 1, PRESET 2,
PRESET 3, PRESET 4, PRESET 5, PRESET 6,
PRESET 7, PRESET 8, PRESET 9, HOME
.
System
FORMAT:
1920x1080P/60/50/30/25/20/15/10/5
1280x720P/60/50/30/25/20/15/10/5
1024x768P/60/50/30/25/20/15/10/5
800x600P/60/50/30/25/20/15/10/5
640x480P/60/50/30/25/20/15/10/5.
Note

The videos from USB and DVI-D are
simultaneously output only at
1080P60/50/30/25, 720P60/50/30/25.

When the videos from USB and DVI-D are
simultaneously output, Video from USB may
not be output when the DVI-D video formats
are changed via menu or preset.
The format change of USB video will change
the format of DVI-D video. When the format
of USB video is changed to one that is not
supported by DVI-D video, The DVI-D video
will not be output.
RATIO SPEED
：
ON, OFF
When RATIO SPEED is set as ON, pan speed
changes automatically based on zooming
times, that is, the more zooming times, the
PRESET FREEZE
：
ON, OFF
When it is on, during a regular preset call, the
video will be frozen at point A till Point B. At
Point B, the video will be displayed normally.
RS-485(RS-485 modes)
HALF-DUPLEX-1: in VISCA protocol, camera
will not return confirmation, completion or
error messages after commands have been
executed.
HALF-DUPLEX-2: in VISCA protocol, camera
will return confirmation, completion or
error messages after commands have been
executed.
DISPLAY INFO: Turn ON / OFF display of pan /
tilt angle and prompt message.
Status
It displays current camera’s address,
protocol, baud rate, video format, mount
mode and software version number.
Restore Defaults
RESTORE DEFAULTS
：
This option is used to
reset all menus to default value. Press OK to
<SYSTEM>
FORMAT 640 x 480P60
RATIO SPEED ON PRESET FREEZE
OFF
RS485PORT HALF-DUPLEX-1
DISPLAY INFO OFF
<STATUS>
ADDRESS 1
PROTOCOL VISCA
BAUD RATE 9600
FORMAT 640 x 480P30
MOUNT STAND
IMAGE VER V1606
USB VER V1.0.0
FIRMWARE V1.0.0
< RESTORE DEFAULTS>
PRESS OK CONFIRM
PRESS BACK CANCEL