avolta Y110RG-BP-S, Руководство пользователя

Страница: 3 / 12

2
Handling the remote controller
Replacing batteries
NOTE:
When the batteries are removed, the remote controller erases all programming.
After inserting new batteries, the remote controller must be reprogrammed.
Location of the remote controller.
Use the remote controller within a distance of 8
meters from the appliance, pointing it towards the
receiver. Reception is confirmed by a beep.
The air conditioner will not operate if curtains, doors or other materials
block the signals from the remote controller to the indoor unit.
8m
CAUTION
CAUTION
Do not mix old and new batteries or batteries of different types.
Do not leave the batteries in the remote controller if they are not going to be
used for 2 or 3 months.
Do not dispose batteries as unsorted municipal waste. Collection of such waste
separately for special treatment is necessary.
Prevent any liquid from falling into the remote controller. Do not expose
the remote controller to direct sunlight or heat.
If other electrical appliances react to the remote controller, either move
these appliances or consult your local dealer.
If the infrared signal receiver on the indoor unit is exposed to direct
sunlight, the air conditioner may not function properly. Use curtains to
prevent the sunlight from falling on the receiver.
The remote controller is power by two dry batteries(R03/LR03X2) housed in the
rear part and protected by a cover.
(1) Remove the cover by pressing and sliding off.
(3) Reattach the cover by sliding it back into position.
(2) Remove the old batteries and insert the new batteries, placing the(+) and (-)
ends correctly.