AVOCOR AVF-6510, Руководство по установке и эксплуатации

Страница: 46 / 85

46
Setup Menu
Auto Adjustment
Force the display to reacquire and lock to the input signal (VGA source only).
This is useful when the signal quality is marginal. Note: This feature does not
continually reacquire the signal.
Options: No, Yes; Default: No
H. Position
Adjust the horizontal position of the image (VGA source only). Press

or

to
select the desired level, and then press ENTER.
Range: 0~100; Default: 50
V. Position
Adjust the vertical position of the image (VGA source only). Press

or

to
select the desired level, and then press ENTER.
Range: 0~100; Default: 50
Phase
Adjust the phase of the displayed signal (VGA source only). Press

or

to
select the desired level, and then press ENTER.
Range: 0~100
Clock
Adjust the clock of the displayed signal (VGA source only). Press

or

to
select the desired level, and then press ENTER.
Range: 0~100
Zoom
Adjust the zoom (overscan) of the image. Press

or

to select the desired
level, and then press ENTER.
Range: 10 steps
Power LED
Enable or disable the status LED
Options: On, Off; Default: On
Real Time Clock
Set the internal clock of the display, and to power on and off the display at
preset times if desired.
Options: User mode, Workday mode, Everyday mode
Default: User mode
Win10 PC Power Mode
Set Win10 PC power mode.
Options: Auto, Manual, Off; Default: Auto