AVOCOR AVF-6510 Скачать руководство пользователя страница 34

Страница: 34 / 85

Clicking on the pop-up ballo would show

In the Device Manager, the view would be (again, use View --> Devices by connection):

In this case, please proceed with Manual Driver Insatllation.

Manual Driver Installation

If the automatic driver installation failed for any of the reasons listed above, or if you would like to install the

driver without having a FlatFrog touch device connected to the computer, the driver can be installed

manually.

The driver provided with this upgrade package was downloaded from http://catalog.update.microsoft.com

(requires Internet Explorer) and is called “Microsoft – Other hardware – WinUsb Device” (version 1.1.0.0 from

2012-08-30).

Manual Driver Installation - Device Connected

Extract the firmware upgrade .zip file (right-click --> Extract all...) to the Desktop.

Open the Device Manager and locate the "HID/DFU"device with the yellow exclamation mark.

Right-click and select "Update Driver Software..."

Содержание AVF-6510






















































































Результаты поиска

Содержание AVF-6510

Отзывы:

Бренды по названию

Популярные бренды

AVOCOR AVF-6510, Руководство по установке и эксплуатации

Результаты поиска

Содержание AVF-6510

Отзывы:

Бренды по названию

Популярные бренды