AVOCOR AVE-6520, Быстрый старт

Страница: 12 / 20

v.05_12_2018 12
Selecting the Source
You can access a number of sources on the Avocor AVE displays including, HDMI,
DisplayPort, VGA & OPS.
The Source button is located on the Connect & Control Bar or on the Remote Control.
Once the menu has been selected, you will see the option to select the source you
require.
HDMI 1, HDMI 2, DisplayPort, VGA & OPS
If there is no active signal from the chosen source, the screen will display the following
message: “No Signal”.
Connecting the Display
Proceed as follows to connect the display to your video sources, external controller.
When connecting your equipment:
1. Turn off all equipment before making any connections.
2. Use the correct signal cables for each source.
3. For best performance and to minimize cable clutter, use high-quality cables that are
only as long as necessary to connect two devices. (Don't use a cable longer than 5
meters).
4. Ensure that the cables are securely connected.