Mount Bracket.
Remove the clamp screw and place
the mount bracket on the handlebar near the right side of
the stem. Insert the clamp screw and tighten it until the
bracket does not move when the Altimeter is inserted or
removed. Small diameter handlebars may require taping
beneath the clamp for a tight fit.
16
I N S T A L L A T I O N
I N S T A L L A T I O N
Mount Bracket
Altimeter 50 Installation.
Slide the Altimeter into
the mount bracket from front to rear until it snaps on.
Advance the Altimeter to the speed function. Spin the
front wheel and watch for a speed reading. If the display
remains at zero, check the wire connection plugs at the
receiver, and make sure that the receiver and transmitter
are aligned and nearly touching.
ALT
IM
ETE
R 5
0
AV
OC
ET
A
x1
00
0
Receiver Wire.
Secure the wire with ties or tape
starting at the receiver. Attach the wire only to parts that
rotate when the bicycle is steered–the fork, the handlebar
stem, or the front brake cable. Do not attach the wire to
the head tube. Wrap excess wire around the front brake
cable housing.
15
Batteries.
Install the batteries in their compartments
on the back of the Altimeter with their positive (+) sides
toward the caps. Press in the caps with your thumb. To
remove the batteries, pry the caps up with a screwdriver.
Note: Removing the batteries erases setup data. After
installing batteries complete the setup procedure. Warn-
ing: Use only Altimeter 50 batteries–see specifications.
Battery
Cap
Cable
Housing
Altimeter
A L T I M E T E R 5 0 S P E C I F I C A T I O N S
Dimensions:
2
1
/
8
" X 2
1
/
4
" X
3
/
8
"
Weight:
1
1
/
4
oz
Display:
Dual; UPPER NUMBERS
5
/
16
" high,
lower numbers
3
/
16
" high
Operational Temperature Range:
0
°
F to 150
°
F
Wheel Sizes:
Calibration for wheels from 9.6" diameter
to 41.7" diameter in .04" increments
Data:
Altitude display updated every second when wheel is
turning or when a button has been pressed within the
last hour, every ten seconds otherwise
Speed display updated every second
Water Resistance:
Waterproof
Batteries:
Two 1.5 v, 1.5–2 year life.
Use Avocet Altimeter 50 batteries or these equivalents–
Ray-O-Vac RW44, Duracell D386, Panasonic
SR43W, Eveready 386
Altitude Functions:
CURRENT ALTITUDE: -990 ft to +19,990 ft in 10 ft
increments, adjustable for barometric change
Trip Climb/Descent: To 19,990 ft in 10 ft increments
(accumulated only while wheel is turning)
Total Climb/Descent: To 1,999,900 ft in 100 ft
increments (accumulated only while wheel is turning)
Speed Functions:
CURRENT SPEED: To 128 MPH in .5 MPH increments
Average Speed: To 128 MPH in .1 MPH increments
(calculated only while wheel is turning; averages up
to 290 hrs without resetting)
Maximum Speed: To 128 MPH in .5 MPH increments
Cadence: 15 to 240 crank RPM (requires kit)
Distance Functions:
TRIP DISTANCE: To 1,999.9 mi in .1 mi increments
Total Distance: To 19,999 in 1 mi increments
Time Functions:
STOPWATCH: Elapsed time to 1:59:59
Clock: 12 hour
22