Avocent Outlook 180DX, Инструкция по установке и эксплуатации

Страница: 28 / 56

22
OutLook 180DX Installer/User Guide
Figure 3.2: Advanced Menus Screen
Assigning Server Names
You can identify servers in a system by name rather than by port number. For
example, in a network environment, you can assign the same names to each
computer as those assigned by the network. To list the computers by name in the
OSCAR Selection screen, see
Changing OSCAR Display Attributes in this chapter.
To access the Port Name Setup screen:
1. Press Print Screen then F2 to access the Advanced Menus screen.
2. Highlight Setup - Names and press Enter . The Port Name Setup screen appears.
Figure 3.3: Port Name Setup Screen
To assign names to servers:
1. In the Advanced Menus screen, highlight Setup - Names and press Enter .
The Port Name Setup screen appears.
2. Highlight the port number of the server you want to change.
3. Type a name for the server. Server names can be up to 12 characters long.
Legal characters are: A-Z, Ø-9, the space and the dash ( - ) character.
4. Repeat steps 2 and 3 for each computer in the system you wish to name.
5. Press Enter to save the settings and exit the menu.
NOTE: Before you can assign names to servers attached to secondary switches, you must first
make the primary switch aware of the secondary switch. See Assigning Device Types in Chapter 4.