Avocent Emerge ECMS2000U, Инструкция по установке и эксплуатации, Страница: 51 / 62

40 Avocent Emerge ECMS2000U Extender Installer/User Guide
To change the audio performance setting for the Receiver:
1. Activate the serial menu as described in
Accessing the serial menu
on page 14.
2. Choose option 1 to access the Receiver menu. If the password option is enabled, you will be
prompted for a password. See
Authentication on page 24.
3. Type the password and press Enter . The Receiver Main Menu will appear.
4. Choose Console Settings . The Console Settings Menu will appear. The current audio
performance setting is displayed beside menu item 4. Audio Performance.
Figure 3.30: Receiver Console Settings Menu
5. Choose Audio Performance . The Audio Performance Menu will appear.This menu shows you
the audio settings that you can choose from. The current setting is indicated by an asterisk
*
Figure 3.31: Receiver Audio Performance Menu
6. Type the number that corresponds to the audio setting you wish to apply and press
Enter .
NOTE: If you choose “off,” audio support will be disabled.
7. To confirm your selection and exit the screen, type 0 (zero) and press Enter . The unit resets
after you press
Enter
.