Avocent DSR Series DSR2035, Инструкция по установке и эксплуатации, Страница: 51 / 114

Chapter 3: Local Port Operation 39
To set the Screen Saver options:
NOTE: The Screen Saver password is set within the DSView software. For more information, see the DSView
Installer/User Guide .
1. Type the number of minutes for Inactivity Time (from 1-99) to delay activation of password
protection and the screen saver feature.
2. For Mode, select Energy if your monitor is E
NERGY
S
TAR®
compliant; otherwise
select Screen .
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with
ENERGY STAR
®
.
3. (Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you
to the Security dialog box.
4. Click OK to save your settings.
To exit Screen Saver mode and log in to the local port:
1. Press any key or move the mouse.
2. If Screen Saver security was turned on in the DSView software, you will see a login screen.
Enter your username and password and then click OK . If you do not know your username and
password, see the DSView Server software administrator.
3. The Main dialog box appears and any previous target device connection will be restored.
To immediately turn on the screen saver:
1. Press
Print Screen
.
2. Then press
Pause
.
This command sequence works only when the user is connected to a target device.
Setting the keyboard country code
NOTE: Using a keyboard code that supports a language different from that of your DSR2035/8035 switch
firmware will cause incorrect keyboard mapping.
Sun servers may use keyboard mappings for non-US keyboards. By default, the DSR2035/8035
switch sends the US keyboard country code to Sun and USB modules attached to target devices and
the code is applied to the target devices when they are powered up or rebooted. Codes are then
stored in the DSRIQ module.
Issues may arise when you use the US keyboard country code with a keyboard of another country.
For example, the
Z
key on a US keyboard is in the same location as the
Y
key on a German
keyboard. Sun servers will interpret pressing the
Y
key on a German keyboard as pressing the
Z
key
when the US keyboard country code is used.