Avocent Cyclades ACS 6000 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 90

Avocent Cyclades ACS 6000 Скачать руководство пользователя страница 29

Chapter 2: Installation

17

To use SSH in a shell, enter the following command:

ssh -l

username

:

port_name

[

hostname | IP_address

]

-or-

ssh -l

username

:

device_name

[

hostname | IP_address

]

-or-

ssh -l

username IP_Port_Alias

To close an SSH session:

At the beginning of a line, enter the hotkey defined for the SSH client followed by a period. The
default is

~

. Or, enter the text session hotkey for the CLI prompt and then enter

quit

.

Pluggable Devices Installation and Configuration

Insert and configure pluggable devices (PC cards and/or USB devices) only after you enable PC
Card and USB Device Detection, as described in the following procedure.

Go to http://www.avocent.com to see the current list of supported pluggable devices.

NOTE:

When a pluggable device is not listed in the internal database, the Device Info column may show no text

at all or show different text based on the type of card. One example is Unknown device f024 (rev 01).

NOTE:

When a pluggable device is not in the current list of supported pluggable devices (PC cards and USB

devices), if the device is detected by the console server, the console server attempts to configure the device with
standard settings. The device might operate normally but it might not be supported by Avocent.

To enable Pluggable Device Detection:

1.

Select

Appliance Settings - Security - Security Profile

in the Web Manager.

The Security

Profile content area is displayed.

2.

Select

Enabled

from the PC Card and USB Device Detection drop-down menu.

NOTE:

When using wireless devices, changes made to a configuration will take effect only after the device is

ejected and then re-inserted.

To install a pluggable device:

1.

Insert the PC card into slot 1 or slot 2 or connect the USB device in the USB port.

2.

Select

Appliance Settings - Pluggable Devices

in the Web Manager. The Pluggable Devices

content area is displayed. If Pluggable Devices Detection is enabled, the inserted pluggable
device’s Device Name, Device Type and Device Info are shown.

NOTE:

A hard disk PC card and a USB storage device are automatically mounted and configured once it is

inserted.

«
...
27
28
29
30
31
...
»

Содержание Cyclades ACS 6000



























































































Отзывы:

Нет отзывов