Version 1.2
Zynq
®
-7000 AP SoC / Analog Devices Intelligent Drives Kit II
9
Demo Preparations
The 8 GB SD card, labeled with Analog Devices logo,
is factory-programmed with the Zynq
firmware, Linux kernel image, user-space application software and file system for a
stand-
alone bootable system. There are several bootable Zynq designs on the SD card, so the
first step is to copy the image for ZedBoard Motor Control into the boot directory.
1. Insert the SD Card labeled with Analog Devices logo into a laptop or PC.
2. Open the folder named z
ynq-zed-adv7511-fmcmotcon2
3. Copy files
BOOT.BIN
and
devicetree.dtb
into the SD card root directory.
4. Safely eject the SD card and insert into ZedBoard (under FMC connector J1).
Note
: the pre-formatted image on the SD card may be 6 or more months old. Therefore you will need to run an update
script after the system is booted. This will be described in later steps.
Figure 2 - Insert the SD Card
Demo Requirements
Accessories required for this demonstration, which are not included in the kit:
HDMI monitor and cable
USB mouse
USB keyboard
USB hub (3 or more ports)
