Avnet MSC C10-MB-EV, Руководство пользователя

Страница: 43 / 48

MSC C10-MB-EV User Manual
43 / 48
4.19 Power Supply ATX Connector
An ATX connector with additional ATX12V connector is available to power the system.
Specification ATX connector:

References: X1503

Connector: Molex 39-29-9202

Pin-out: Refer to ATX specification V2.2 [2]
Specification 2 pol. Power jack connector:

References: X3101

Connector: Kycon KLD(X)-0202-B (6.3mm, 2.5mm)

Pin-out: Refer to Table 25 GND pin2 --
(●-- pin1 +5-20 V
Pin Signal name Function
1 +5-20 V
VCC (inner pin 2.5mm diameter) 3.5 A
(Note: Rev.1 supports only 7.5V
– 20V (LY10100102)
2 GND Ground (shell 6.3mm diameter)
Table 25 Pin-out Power IN Connector
Warning: The input power pins are connect to the power pins at the COM Express
connector. Check the power input range from your COM Express module if you use
other power supply than 12V.