MSC C6B-SLH
MSC C6B-SLH User Manual
98 / 144
Feature
Options
Description
Memory Remap
Enabled, Disabled
Enable/Disable Memory Remap above 4GB
Time Measure
Enabled, Disabled
Enable/Disable printing of the time it takes to execute MRC.
DLL Weak Lock Support
Enabled, Disabled
Enable/Disable Dll Weaklock support
Pwr Down Idle Timer
Value
The minimum value should = to the worst case Roundtrip delay +
Burst_Length. 0 means AUTO: 64 for ULX/ULT, 128 for DT/Halo
Mrc Fast Boot
Enabled, Disabled
Enable/Disable fast path thru the MRC
6.9.3 Graphics Configuration
Feature
Options
Description
Graphics Turbo IMON
Current
14-31 (default)
Graphics turbo IMON current values supported (14-31)
Skip Scaning of External Gfx
Card
Enabled, Disabled
If Enable, it will not scan for External Gfx Card on PEG and PCH
PCIE Ports
Primary Display
Auto, IGFX,PCIE
Select which of IGFX/PEG/PCI Graphics device should be Primary
Display Or select SG for Switchable Gfx.
Internal Graphics
Auto, Enabled, Disabled
Keep IGFX enabled based on the setup options.
GTT Size
2 MB, 4MB, 8MB
Select the GTT Size
Aperture Size
128MB
– 4096MB
Select the Aperture Size
NOTE : Above 4GB MMIO BIOS assignment is automatically
enabled when selecting 2048MB aperture. To use this feature,
please disable CSM Support.
DVMT Pre-Allocated
32 MB
– 2048 MB
Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used
by the Internal Graphics Device.
DVMT Total Gfx Mem
128 MB, 256 MB, MAX
Select DVMT5.0 Total Graphic Memory size used by the Internal
Graphics Device.
Gfx Low Power Mode
Enabled, Disabled
This option is applicable for SFF only.