Page 12 of 35
May 09, 2019
Data Sheet and User Manual
AES-MS-MT3620-M-G Module
Data Sheet and User Manual
Module Placement and Ground plane requirements
For optimum antenna performance the Ground plane of the OEM board (on which the module is fitted)
needs to be maximized
The GND pads in the antenna area of the module must be connected to this Ground plane
Placement of the module should be 6 mm or more from any corner of the OEM carrier board
A PCB cutout is recommended in the host carrier board beneath the chip antenna (17mm x 7mm)
Figure 4
– OEM board Footprint for AES-MS-MT3620-M-G Module