Avnet AES-ATT-M18QWG-SK-G Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 52

background image

Page 8

1 Introduction

The

Global LTE IoT Starter Kit

is a next-generation System-on-Module IoT solution, enabling the design

of cellular connected edge devices, for operation in Europe.

Powered by AT&T IoT services available through Avnet, this kit provides a complete development
environment for sensor-to-cloud applications and services.

Designed to be used for both prototyping and production, the slim form-factor LTE System Board

with it’s

regional certifications and pre-registered Micro-SIM card for AT&T M2X service (included in the kit), as
well as versatile expansion options, together provide a high level of enablement that facilitates easy IoT
deployment and reduction in overall risk.

The Starter Kit features a small (79.5 mm x 30 mm) LTE System Board built around a Wistron NeWeb
(WNC) M18QWG global LTE Cat-4 modem module. The M18QWG module provides cellular modem
functionality plus an applications processor core dedicated for user applications, eliminating the need for
an external host processor. A rich

set of embedded system peripherals, controllable through the user’s

application code, are easily accessible via a 60-pin expansion connector and 2x6 peripheral module
header. This enables easy system customization with application specific sensors and I/O interfaces
through the addition of user-created or off-the-shelf plug-in boards. The LTE System Board includes
ambient light, temperature and accelerometer sensors onboard, for out-of-box demonstration examples.

User application code runs directly on the M18QWG module, leveraging the OpenEmbedded software
framework for Linux application development. A Software Development Kit (SDK) specific to the
M18QWG module provides the necessary API calls to access hardware peripherals and system
resources. Application code built with the SDK is loaded into the M18QWG module through a USB
interface on the development board eliminating the need for external proprietary JTAG cables.

Cloud application development is supported by AT&T’s M2X Data Services and Flow Designer.

-

M2X

is a cloud-based, fully managed data storage service for connected machine-to-machine

(M2M) devices

-

Flow Designer

provides a visual editing environment for the design of connected applications,

enabling IoT developers to rapidly create and deploy innovative new applications.

Design goals of this LTE IoT Starter Kit included the following:

-

Provide a versatile prototyping-

and

production-ready (cost-optimized) platform for development

and productized custom applications using WNC M18QWG Cat.4 cellular modem and GPS, for
deployment Global

ly via AT&T’s partner LTE networks

-

Provide hardware expansion examples using:
- Pmod

TM

-compatible peripheral boards,

- Custom breakout board

-

Provide reference designs that accelerate development of applications for popular use cases

-

With the provided AT&T SIM starter pack, demonstrate the use of:
- AT&T M2X and Flow Designer
- Additional 3

rd

party cloud services such as AWS, Watson IoT, and Azure

«
...
6
7
8
9
10
...
»

Содержание AES-ATT-M18QWG-SK-G





















































Отзывы:

Нет отзывов

Похожие инструкции для AES-ATT-M18QWG-SK-G

Бренд: Transplant Computing Страницы: 30

Бренд: Here Страницы: 3

Бренд: Navibe Страницы: 8

Бренд: WhereSafe Страницы: 2

Бренд: Thales Страницы: 234

208 Touch Screen Navigation

Бренд: PEUGEOT Страницы: 183

Бренд: Ordnance survey Страницы: 15

Бренд: GoPass Страницы: 2

Бренд: GoPass Страницы: 2

Бренд: BITREK Страницы: 23

Бренд: Garmin Страницы: 14

Бренд: Packard Bell Страницы: 10

Бренд: Qstarz Страницы: 2

Бренд: Qstarz Страницы: 2

Бренд: Fortuna Страницы: 11

Бренд: Swarm Страницы: 22

Бренд: Swarm Страницы: 22

Бренд: REWIRE SECURITY Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды