OVATION PH 8.3
23
Advan ced Sett ings
ℹ
NOTE
Always point the RC 3 PHONO remote control directly at the
front of the PH 8.3.
3.0.1 Replacing batteries
Abb. 4. Bottom of the RC 3 PHONO remote control
CAUTION
Do not remove the two middle screws without arrow markings
for battery replacement!
If the range of the remote control decreases significantly,
new batteries must be installed. Remove the six screws on
the bottom marked with arrows.
Now turn the remote control over and take out the bottom
with the printed circuit board. Remove the used batteries and
replace them with two new ones of the same type (Lithium
button cell 3V, type CR2032). When inserting the batteries,
make sure that the polarity of the batteries is correct (the "+"
mark points upwards), otherwise the electronics may be
damaged.
