AVM OVATION MP 6.2, Руководство по эксплуатации

Страница: 21 / 32

4.2 Activation and stand by mode
To switch on a connected device (see
Pairing
4.7.5), please pick up your RC 9 remote
control which automatically switches on due to the integrated movement sensor. Then,
please choose one of the connected devices from the list and press the Enter button (10).
Notes on the optional quick start function can be found in section 4.9.
4.3 Battery charge
In order to charge the included lithium-ion battery of your RC 9 remote control, please
connect the power supply unit with the USB cable. On the other end, please connect the
USB charging cable optionally with the RC 9 remote control or with the supplied docking
station. The charge starts automatically, as soon as the power supply unit is connected to the
power supply system and if necessary, the RC 9 remote control is placed in the charging
cradle of the docking station.
NOTE : Due to the included motion sensor of the RC 9 remote control, the device may be
unintentioanally activated during transportation. For this reason, the RC 9 is delivered with a
fully discharged battery. In view of a long lifecycle of the lithium-ion battery, we recommend
fully charging the battery before using it for the first time. Please follow the above mentioned
instructions and do not interrupt the charging procedure until the status bar in the upper right
corner of the display indicates a fully charged battery.
Battery is fully charged, remote control is connected to the charger, charging completed
Battery is almost fully charged, remote control is connected to the charger
Battery is empty, remote control is not connected to the charger
4.4 Colour display
The colour display divided into three sections in any operating mode:
1
Header section: In the header section the current control area is shown (e.g. source,
system, internet radio etc.). On the right-hand side is the charging status of the integrated
lithium-ion battery (for an explanation of the charging status symbols please refer to the
section above.
2 Content section: The content section is the central user interface of your RC 9 remote
control where both menu points of the currently accessed control area and graphical user
elements are being shown.
3 Footer section: In the upper part of the footer section you can both find the actual time
and informatin on the current connection statuss. The lower part of the footer section is
divided into four parts which can be assigned with so-called Hotkeys (please refer to
sections 4.6 and 4.7.4 for detailed information on Hotkeys).