AVM OVATION MP 6.2, Руководство по эксплуатации

Страница: 23 / 32

23
4.7.3 System Information
The menu item
System Information
contains information on technical details of your RC 9
remote control such as the current firmware version, serial number and more. Furthermore,
the firmware of the RC 9 remote control can be easily updated by pressing the red Option key
(5). Please note that the RC 9 remote control needs a direct USB connection with a personal
computer in order to conduct the update process.
4.7.4 User Settings
The menu item
Settings
offers a series of useful functions which can be accessed by
pressing the Navigation keys (11), the Enter key (10) or the alphanumeric input keys (25).
NOTE : The left Navigation key (11) is used to delete entered characters and numbers. The
blue Option key (5) is used to toggle between upper and lower case characters.
Name
This option allows you to customize the name of your RC 9 remote control.
Time
The option "Time" enables you to to adjust the time settings of your RC 9 remote control.
Hours and minutes are displayed in individual rows.
Stand by
The option
Stand by
allows you define the amount of time until your RC 9 remote control
switches to stand-by mode. The preset value of 60 seconds can either be reduced to a
mininum of 10 seconds or increased to a maximum of 300 seconds (= 5 minutes).
Time in cradle
If the option
Time in cradle
is enabled, the RC 9 remote control will display the current time
on its colour display when placed in the cradle (included docking station). Please note that
the
Time in cradle
option is not available when the RC 9 remote control is being charged via
the USB cable.
Brightness
Choose between three different brightness levels of the colour display. All changes are
applied immediately after selection.
HKEY Configuration
HKEY Configuration
allows you to assign four different devices to the four available Hotkeys
(4) of your RC remote control. This way, you can comfortably select up to four devices of a
currently active zone with the touch a single button.
Please note that only one device can be controlled by the RC 9 remote control at a time. If
you happen to choose another device from the Hotkeys menu, the connection to the formerly
linked device will be interrupted.