AVM OVATION CD 6.2, Руководство по эксплуатации

Страница: 8 / 19

8
1.5 Connection to a preamplifier or integrated amplifier
Connect the analogue outputs (16-19) to the high-level inputs of a preamplifier or integrated
amplifier. The RCA-cinch outputs and the balanced XLR outputs are fully decoupled from
each other and can be used independently.
1.6 Connection of digital signal sources
Digital signal sources
Connect the outputs of your digital sources to the corresponding inputs of the CD 6.2:
- Optical inputs (23,24)
- Coaxial inputs (25,26)
- USB B input (22)
- AES/EBU input (27)
Digital input sources
The input of a digital recorder must be connected to the digital outputs (20, 21). The signal on
the digital outputs depends on the selected source (e.g.
DIG COAX , DIG OPT ).
1.7 RC 3 remote control
The included RC 3 remote control allows for easy and comprehensive control of the CD 6.2.
All main functions of the CD 6.2 can be controlled by the RC 3:
On/Off
,
Source Selection
,
Station Selection , SKIP , PLAY / PAUSE , and STOP .
By pressing the
PLAY
button briefly a second time, the
PAUSE
function is activated while in
CD mode. By pressing the
STOP
button briefly a second time, an inserted CD is ejected. By
holding down one of the SKIP buttons a little longer, the device switches into seek mode
( Fast Forward / Reverse ).
If there is no CD inserted or the CD is not in playback mode, you can switch between the
different digital inputs by pressing the
STATION buttons of the RC 3. Press PLAY to return to
CD mode.
If a variable output level has been activated in the personal setup menu (see 3.1.1), you can
control the output level of the analogue outputs of your CD 3.2 / CD 5.2 by pressing the
VOLUME buttons on your RC 3 remote control (see also 2.6).