Installation Requirements
8
FRITZ!Card DSL – 1 FRITZ!Card DSL
1.3 Installation Requirements
Your computer must meet the following requirements to op-
erate FRITZ!Card DSL:
l
You must have an ADSL access.
FRITZ!Card DSL supports the ADSL accesses offered by
various providers.
l
An ISDN access with the DSS1 (Euro ISDN) D-channel
protocol must be installed.
l
An IBM or 100% compatible computer with Pentium II
processor or comparable processor, 300 MHz or higher,
and at least 32 MB RAM.
l
Your computer must have a free PCI slot and a free inter-
rupt for this slot.
l
The operating system Microsoft Windows Me, Windows
98, Windows XP or Windows 2000 Professional must be
installed.
l
To operate FRITZ!fon, a module of the FRITZ! communi-
cations software, you must have a sound card and driv-
er with full-duplex capability, and suitable sound in-
put/output equipment (such as a headset).
You can install FRITZ!Card DSL if your computer meets all of
these requirements.
1.4 Installing FRITZ!Card DSL Parallel to
an ISDN-Controller
If you already have an ISDN-Controller installed, for instance
an AVM FRITZ!Card PCI, then please follow the instructions
below:
Operating FRITZ!Card DSL and an ISDN-Controller
The FRITZ!Card DSL is equipped with an integrated passive
ISDN-Controller, comparable to a FRITZ!Card PCI by AVM. Op-
erating both of these products in one system presents no
problems. However, the ISDN features of FRITZ!Card DSL can-
FCdsl-e.book Seite 8 Freitag, 17. Mai 2002 11:55 11
