Connecting Computers Wirelessly via WLAN
27
2.
As soon as the “WLAN” LED begins flashing, enable the
WPS function on the other WLAN device, either by press-
ing a button or in the device’s user interface (depending
on the device). Activation must be started within two
minutes.
The FRITZ!Box and the WLAN device now connect with each
other automatically. The WLAN device adopts the security set-
tings of the FRITZ!Box.
As soon as the WLAN connection has been established the
computer is connected to the FRITZ!Box.
WPS with the PIN Method
If your WLAN device supports WPS, but does not have a but-
ton to start the push method nor any possibility to enable it in
its control software, use the PIN method to establish the
WLAN connection.
You can choose between two methods:
•
the FRITZ!Box specifies the PIN
•
the WLAN device specifies the PIN.
The FRITZ!Box Specifies the PIN
1.
Open the FRITZ!Box user interface.
2.
Select the “WLAN / Security” menu.
3.
Go to the “WPS Quick Connection” page.
Info
Fixed Line
Internet
WLAN
Power/DSL
f
f
o
Inf
o
I
Push for approx.
6 seconds
FRITZ!Box_7360-en.fm Seite 27 Mittwoch, 15. Februar 2012 5:21 17
