Want the latest product information?
Visit
www.avlite.com
9
5.0 Safety Information
Before proceeding with installation or service, make sure the following conditions are met:
• Ensure power lines are not ‘live’ (NO ELECTRICAL HAZARD)
• Avoid touching live circuits!
• Avoid touching any component or any part of the circuitry while the unit is operating. Do not change components
or make adjustments inside the unit with power on.
•
Make sure the light fixture mounting is vertically aligned to guarantee the required beam pattern of the airfield
light.
• Make sure any nearby obstacles do not impede the lights’ beam pattern.
• When installing, comply with all local electrical code(s).
•
Mains power should always be disconnected when work is being done in close proximity to electrical fittings, and
electrical work should only be done by a licensed electrician.
• Operate the light only within the indicated electrical ratings and product usage instructions.
• To ensure that the light and peripheral equipment function safely and correctly, use cable in compliance with the
effective local electrical code.
• Do not stare at the LED or shine the LED into your eyes or those of another person.
• Dispose of the product according to the local laws and regulations for your region, for example, at a recycling
centre that accepts electronic devices.
• Ensure the tower or mast is grounded (NO RF HAZARD).
• Check the mast lighting circuit is not faulty.
• Make sure the mounting pole is vertically aligned to guarantee the required beam pattern of the obstruction light.
