YX Matrix Switching System
—
User Manual
27
Figure 7-4
（
b
）
; in “
” select 9600 for signal transmission as shown in Figure 7-4
（
a
）
7.0.2.8 Exit Function Usage
Function Description: To exit the operating software.
7.0.2.9 Other Usages
Displays the presently saved switching status as shown in Figure 7-5 below:
Figure 7-5
When Video/Audio corresponding to Output is open, it shows the Output ports
corresponds to the Video/Audio Input ports; when they are close the word None will be shown in
red in the above table.
8.0 Communication Protocol and Control Command Code
Communication Protocol: Baud rate 9600bps, no odd or even calibration bit address, 8bit
transmission address, 1bit stop address.
Refer to the “Command list.pdf” on the CD-ROM for the command system.
