YX Matrix Switching System
—
User Manual
25
Figure 7-3
7.0.2.3 Select all output, DeSelect all output Switching Functions
（
1
）
Select all output Function Description: You can use this function to select one port for input
and all output ports for output.
A specific example of operation is described below:
Example:
Now, you have a YX-3088 matrix with all input and output ports properly
connected to the equipment. The needed input/output ports should be set to audio/video channel
1 while switching all output ports to output.
Make sure you have selected both “Video” and “Audio” by checking the boxes to the left.
Then, press the Select all output key and select the input number key 01. Click on the
matrix icons along the 01 row
to turn them into
to complete the command
operation.
（
2
）
DeSelect all output Functin Description: It is used to close the Select all output function.
7.0.2.4 Disconnect all Command
Function Description:
To close all the switching methods.
Press the “Disconnect all” key to close connection to all input and output ports.
7.0.2.5 Memory Function Usage
Function Description:
To store and retrieve.
Store Functin Description:
The Store Function saves all the present input/output switching
relations to any Locations from #1 to #8 you desired.
