Matrix Switching System
—
User Manual
7
4.0 Device Installation
The HDMI Series Matrix device has a black metallic housing. It can be placed on a
sturdy desk directly or installed on a 19-in bracket. See Figure 4-1 below:
Figure 4-1 Mount the HDMI Matrix Device on a Standard Bracket
5.0 Front/Rear Panels
5.0.1 Front Panel
Figure 5-1 HX-2388 Front Panel
The Hx-2388 Matrix Switching System supports up to 8 Output/Input switching keys on
the Front Panel allow you to switch signal quickly.
There are four kinds of module combinations as below:
Operation method No. 1:
“Output Channel
"
+
“
Input Channel
"
Click the Output button then click the Input button to set the combinations.
Operation method No. 2:
“STO or RCL
"
+
“
Output Channel
"
Click the STO or RCL button then click the Output button.
Operation method No. 3:
single operation
This example for EDID button, you can click the EDID button directly.
Operation method No. 4:
“STO and RCL
"
+
“
Input Channel
"
Click the STO and RCL button then click the Input button to set the combinations.
OUT1~8 keys
(output channel)
:
Indicate the Channel 1~Channel 8 for HDMI signal
output to peripheral display. You can also use these keys to adjust the status or access
the settings
IN1~8 keys
(input channel)
:
Indicate the Channel 1~Channel 8 for HDMI signal input.
You can use these keys to switch to the connection of the connected signal source
channels.