S E AM L E SS HDBAS E T M AT RIX S W IT CHE R – HX - 2 344Z
13
5.2 Rear Panel
Figure 5-2 HX-2344Z Rear Panel
HX-2344Z supports up to 4 output jacks (RJ-45) on the rear panel, each female terminal
separately form the output jacks.
HX-2344Z terminal channels numbered as OUT1~4 are
for signals output. The input terminal supplies you to connect to different equipment
including CD/DVD player, Blue Ray player, PS3, Video Camera, STB and so on.
Power port:
The Power Port is applicable for 100~240VAC, 50~60Hz connected to the
outlet of power source. Refer to
6.4 Power Connection
.
Power switcher:
To switch power ON or OFF the Matrix Switcher.
IR Tx1~4 ports:
Used to connect to the IR Blaster cable for IR pass-through.
Figure 5-3 IR Blaster Pin Definitions
IR Rx1~4 ports
: Used to connect to the IR Receiver cable for IR pass-through.
Figure 5-4 IR Receiver Pin Definitions
IR EXT port:
This is used to connect the IR Receiver Cable for the Matrix Switcher
Remote Controller.
Input ports (HDMI1~4):
You can use the HDMI input ports to connect the CD/DVD
player, Blue Ray player, PS3, Video Camera, STB and so on.
Output ports (OUT1~4):
You can use the output RJ-45 ports for over long connections
via the extensible accessory devices.
