AVLink HS-E P Series, Руководство пользователя

Страница: 18 / 40

HDBaseT HDMI Distribution Amplifier -­ HS Series
18
The VS100 family features the following:
When the VS100 is in low power mode (LPPF1/2), the sample rate of the PDIF channel
is reduced to 100 KHz. This implies that high data rates may not be used when the
VS100 is in LPPF.
ƒ Enables 10.2 Gbps of HDMI 1.4 traffic (including HDCP) and 100Mbps Ethernet in
parallel over a single LAN cable according to the following specifications:
Cable Type Range Supported Video
CAT5e/CAT6
100 meters
Most common full HD formats:
-­ Up to 1080P, 60Hz, 36bpp
-­ Data rates lower than 5.3 Gbps or below
225 MHz TMDS clock
70 meters Ultra HD video formats:
Deep color: 1080P, 60Hz, 48bpp
UltraHD 4K x 2K
Data rates higher than 5.3 Gbps or above
225MHz TMDS clock
CAT6a/CAT7 100 meters
ƒ Full HD support: 1080P@60Hz@48b/pixels, 3D, UltraHD 4K x 2K
The VS010 family features the following:
Enables 10.2 Gbps of HDMI 1.4 traffic (including HDCP) over a single LAN cable
according to the following specifications:
Cable Type Range Supported Video
CAT5e/CAT6 60 meters Most common full HD formats:
-­ Up to 1080P, 60Hz, 36bpp
-­ Data rates lower than 5.3 Gbps or below
225 MHz TMDS clock
CAT6a/CAT7 70 meters
CAT5e/CAT6 35 meters Ultra HD video formats:
-­ Deep color: 1080P, 60Hz, 48bpp
-­ UltraHD 4K x 2K
-­ Data rates higher than 5.3 Gbps or above
225MHz TMDS clock
CAT6a/CAT7 40 meters