Ensure the headphones are turned on.
Press the MFB button (6) until the right Led indicator light turns solid red with a descending
sound.
Pairing the device
1.
Making sure there is power remaining in BNC100.
2.
Press and hold the MFB button (6) until the LED indicator (5) flashes in blue once then in blue
and red alternatively which indicates that the headphone entered into pairing mode.
3.
Enable searching of nearby Bluetooth devices using the Bluetooth menu on your device.
4.
Select “
BNC100
” from the Bluetooth device list on your mobile phone. If connected, the
headphone will enter into standby mode.
BNC100 can be paired with two Smartphone at the same time.
If BNC100 was previously paired to a Smartphone, it is possible to be paired with a 2nd
Smartphone: restart BNC100 (switch off and switch on) to enter pairing mode; repeat the above
pairing procedure to pair BNC100 with the 2nd Smartphone; and then reconnect BNC100 with 1
st
Smartphone; finally two Smartphone can connect with BNC100.
Note:
1.
The headphone will automatically connect the last paired device once it is in effective range.
2.
The headphone will be turned off automatically if no device connected within
10 minutes.
To clear the pairing list
When Bluetooth is paired, let go and press 2 until the purple light is on.
Blutooth Mode:
Playing music
Thanks to the sensitive touch panel (7) on the right side of BNC100, it is possible to play/pause,
control the music selection on your device, and adjust the volume as well, simply by touch.
1)
To play / pause music, when the headphone put on the head, tap the touch panel in the
middle twice.
(NOTE
：
To control the play/pause music, as the sensors functions of the headphone,
you must put the headphone on head or put your centre of the palm to full touch the
earmuff. To control the play/pause music).
