![background image](http://html1.mh-extra.com/html/avl-looms/k-series/k-series_user-manual_3032549078.webp)
Additional Loom Options
K-Series Loom User Manual
Page | 74
Track & Mount
4)
Repeat this process with the remaining bolts.
Figure 80 – Track and Mount supports
Attaching the track to the track arms
1)
Place the track so that the lengthwise groove is on top.
2)
Mount the track to the brackets on the track arms using two 5/16”
x 2-1/2” hex bolts, washers, and square nuts on each side.
Mounting the Track and Mount on the Loom
The AVL tension box track mounting system employs a quick release.
1)
To install the track/arm assembly, place the track arms between
the two externally mounted studs that you attached to each rear
vertical of the loom.
2)
The track arms should initially go in at an angle with the front stud
fit into the notch on the upper edge of the track arm.
Содержание K Series
