AVL Looms K Series, Руководство пользователя

Страница: 61 / 141

K-Series Loom User Manual Loom Assembly
Install The Upper (Primary) Warp Beam Page | 57
Install the Cloth Beam Cover
1) Place the cover into position over the cloth beam.
2) There are two small levers which lock the cover into position. Make
sure the levers catch the cover.
Figure 59 - Cloth Beam Cover
3) To remove the cover, push the levers down and pull the cover
away.
I
NSTALL
T
HE
U
PPER
(P
RIMARY
) W
ARP
B
EAM
The K-series loom is designed to carry two beams.
When using two beams at the same time, a second separation beam will
need to be used.
If you are using a single Beam, install it in the upper position. The brake
drum and tension system will be on the non-Dobby side of the loom (the left
if you are in position to weave).
1) Locate your Warp Beam and the axle pockets located on the front
edge of the Rear Verticals.