AVIX Autonomic Mark II, Руководство пользователя

Страница: 12 / 16

11
User Manual AVIX Autonomic Mark II - Version 2.0
The Autonomic has encountered an error and user action is required.
If the autonomic was bursting it will automatically try to resolve this
error every minute. To check the error type, please connect to the
AVIX Autonomic and check the device status in the user interface (see
chapter 4.2; Connecting to the device).
9. Troubleshooting
If the AVIX Autonomic is not performing as expected, check the bird-
shaped LED indicator on the back of the AVIX Autonomic enclosure to
identify the device status (see status list below). Alternatively, check
the device status in the user interface (see chapter 4; Configuration).
To increase visibility of the status of the AVIX Autonomic, the
LED status on the bird-shaped indicator on the back of the AVIX
Autonomic is reflected by the LED panel on top of the Power
Switch Module. The brightness of the LED panel on the Power
Switch Module can be adjusted in the user software.
LED color* LED appearance Status
OFF Static
OFF status:
No power to AVIX Autonomic.
Blinking white
OFF (powered):
Press I/O button to switch ON/OFF the Autonomic.
Static red
Emergency:
The AVIX Autonomic has stopped working because of the emergency stop on the Power Switch Module has
been pressed. After the emergency stop has been released, the color of the AVIX Autonomic remains red.
Blinking red
Error:
The AVIX Autonomic has encountered an error and user action is required. If the autonomic was bursting it
will automatically try to resolve this error every minute. To check the error type, please connect to the AVIX
Autonomic and check the device status in the user interface (see chapter 3).
Static green
Bursting with laser output:
The Autonomic is running a pattern
Blinking green
Bursting with no laser output:
The Autonomic is moving to its first waypoint.
Static blue
Bursting (pause):
The AVIX Autonomic is waiting to perform the next pattern.
Blinking blue
Bursting (no pattern state):
The AVIX Autonomic is waiting to return to its predefined timeslot(s). No patterns will be played.
Static yellow
Standby:
The Autonomic is switched on, but either no patterns or timeslots are defined or bursting is disabled.
Static purple
Initialization:
AVIX Autonomic is starting up. If this takes more than 20 seconds, disconnect power and try again.
Blinking purple
Upgrade State:
The Autonomic is performing software update, please don’t perform any actions until the update is completed.
* Shown on both the bird-shaped LED and the LED panel on the Power Switch Module.
WARNING: Hazardous laser output!