DEFLATION
PRIOR TO DEFLATION, REMOVE ALL CHILDREN FROM THE UNIT!
Use one of the Inflator/Deflator devices recommended in the “Inflation”
Section for faster deflation.
Halkey Roberts Valve
- Unscrew the cap by twisting counterclockwise to
expose the air valve stem. Open the air valve by pushing in the stem and
rotating clockwise. Allow air to escape. Pushing on the stem and rotating
counterclockwise will seal the valve. Replace cap making sure it is tightened
securely.
Big Black Valve
– Unscrew the cap by twisting counter clockwise. Press the
Red Button on the Flap and allow air to escape. Replace cap making sure it is
tightened securely.
Completely Dry Unit.
Wipe the product off with a terry cloth towel and allow
to dry completely. Store for next use. See Storage Section for details.
8
EZ Up Quick Connect
Line up the EZ Up to the Rock by placing both units against each
other and lining up the loops on each side. Unit must be on level
ground to attach. It may be easier to attach to the unit before
inflating.
Thread the tube through the loops. Then thread the included string
through the PVC tube and caps. Attach tube caps and tie the string
on either end of the tube cap leaving approximately 3” to 4” of
excess on both sides. Cut off any remaining excess.
Note: Pipe will
thread through
loops easier if wet.
