INFLATION
SET UP AND SUPERVISION MUST BE DONE BY A MATURE AND KNOWLEDGEABLE ADULT!
You can use the following devices to inflate the Product:
- Electric Inflator/Deflator (household current)
- Inflator/Deflator that plugs into a DC outlet in your vehicle
- Any other inflator designed for inflatable boats, rafts, pool floats, air beds,
camping mattresses, and other low pressure inflatables.
- Shop Vac or Leaf Blower.
CAUTION:
Use extreme care when using an electric inflator anywhere near
water. Beware of the dangers of electrocution when using electric powered
inflators. Precautions should be observed during use and handling to prevent
shock.
DO NOT inflate with an air compressor or other high pressure pump!!
This
unit is designed to be inflated with a high volume of air but at a low pressure.
DO NOT allow children to play with the product until it is fully inflated!!
6
Air Valve Stem
CAP
Halkey Roberts Valve
– Unscrew the cap by twisting counterclockwise to
expose the air valve stem. Open the air valve by pushing in the stem and
rotating clockwise. Inflate with your inflation device until firm. Pushing on the
stem and rotating counterclockwise will seal the valve. Replace cap making
sure it is tightened securely.
Air Valve Stem
Big Black Valve
- For faster inflation if your product has a Big Black Valve
you may use it to do the bulk of your inflating. Just unscrew the cap and
hold your inflator up against it. You will need to top off using the Halkey
Roberts valve.
