Avital AMX 68, Руководство по установке

Страница: 14 / 15

Programming Your Remote Controls
The alarm allows the user to add new remote controls in one step, delete lost or
stolen remote controls or rearrange the factory preset remote control functions.
All remote control programming features are accomplished by turning the
ignition key on (or starting the vehicle) and flicking the valet switch on and
off a preset number of times.
1. Remove the alarm from valet. Programming cannot be accessed while
the alarm is in the valet mode, indicated by the alarm LED on solid red.
2. Select the feature from the "Programming Table for Remote Controls."
Note the number of chirps.
3. Turn the ignition key to the "ON" position.
4. Within 10 seconds, begin flicking the valet switch on and off. The siren
will chirp one time each time you flick the switch on then off.
5. Continue flicking the valet switch on and off until you reach the
number of chirps associated with your chosen feature.
NOTE: Stop on the chirp.
6. Follow the "Secondary Action."
7. Turn the ignition key off.
8. Repeat steps 1-7 for any other feature you wish to program.
Pro gram ming Ta ble for Re mote Con trols
Fea ture
Fac tory
Set ting
# of
Chirps
Sec on dary Ac tion
Arm/Disarm/Remote
Panic
Channel 1 9
Press any remote control button you choose to operate
this feature. Siren will chirp once for confirmation.
Accessory (-) Output Channel 2 10
Press any remote control button you choose to operate
this feature. Siren will chirp twice for confirmation.
Silent Arm/Disarm Channel 3 11
Press any remote control button you choose to operate
this feature. Siren will chirp 3 times for confirmation.
All Channel Learn — 12
Press button #1. The siren will chirp 1 time. Remote
control will operate at factory preset order.
Instant Code
Deletion
— 13
Wait 3 seconds. The siren will chirp twice. All Remote
Controls are erased from memory.
14
Diablo
2
/AMX 68/AT-58 Installation Manual 3/31/99