8
Setting the Date and Time
It is necessary to set the date and time for the unit every time batteries
are initially installed or replaced.
To set the date and time, proceed as follows:
1. While in power off mode, press the “ Date and Time Set ” button to
enter Date and Time setting procedure and the Year value will begin
to flash.
2. Press the “ MEMORY Recall ” button to advance the display to the
desired year, press “ Power ” button to confirm the year.
3. Next, the month will blink. Repeat steps 2 to set the month and date,
then hours, then minutes.
4. After setting the minutes, the unit will automatically exit out of the
date/time setting mode and briefly show the word OFF before
shutting down.
