Avision AN360W, Руководство пользователя, Страница: 149 / 207

141
Action:
1. Follow the instruction on the Warning dialog box to remove the rest pages on
the feeder.
2. Click OK to close the Warning dialog box.
3. Scan the rest pages.
Clear the Multi-Fed Paper: Auto
If this is checked, once multi-feed is detected and scanning operation is stopped,
the scanner will automatically clear the transport of the multi-fed paper. If this is
not checked, once multi-feed is detected and scanning operation is stopped, you
need to manually clear the transport of the multi-fed paper. Note: The
availability of this option varies based on type of scanner.

Multi-Feed Alarm
If a wave file is added, the scanner will make a sound alarm if multi-feed is
detected yet no Warning dialog box will be displayed.
If “Stop Scanning after Multi-Feed” is selected, the scanner will stop the feeder.
If “Stop Scanning after Multi-Feed” has not been selected, the scanner will
continue to scan till the end of your document.
Action:
1. If “Stop Scanning after Multi-Feed” is selected, follow the action described in
the preceding section “Stop Scanning after Multi-Feed” on the previous page to
complete your job.
2. If “Stop Scanning after Multi-Feed” has not been selected, rescan the pages
where multi-feed is detected.
How to add the sound alarm
：
1. Click the Browse button on the right side of the speaker icon. The Open dialog
box appears.
2. Choose your wave file.
3. Click the Open button. The wave file is added.
Units
Defines the primary measurement system. Inches, Millimeters, and Pixels are
available.