Avision AN360W, Руководство пользователя, Страница: 110 / 207

102
3. After the scanner has been connected successfully, launch your
TWAIN-compliant image-editing software application to start a scan.
Note:

The network scanner can be used by one user at a time. If the network scanner is
being used by other user, you will be prompted with a message to connect the
scanner later. When the scanner is available, you will also be prompted with a
message to connect the scanner and start scanning your document.

If the network scanner has not been found, it is probably the scanner and your
computer are not in the same LAN. In this case, you can assign a specific IP
address of the scanner to let [Virtual Scanner Link] automatically search the
scanner. Click the [Option] button, type your IP address on the [Searching
Address] field
(1) , then click the [+] button (2) and finally click [OK] (3) to
complete.

Searching Time: When the program is launched, it automatically searches the
scanner in the network in 5 seconds (default). The searching time can be changed
from a range of 5 to 20 seconds.

If the [ Virtual Scanner Link ] program has been closed and then launched again,
[ Virtual Scanner Link ] will automatically search and connect the network scanner
it has previously connected to.
(1)
(2)
(3)