14
J10 CONNECTOR - RS-232 or 422/485 Serial Connector
The J10 connector is a standard serial communication port that allows the connection
of computers, controls or any other device that needs remote communication through
a reliable wireless data channel. The connectivity provided by the port is in real time
and acts as a point to point transmitter.
Pin
Signal
Pin
Signal
2
TX
Out
7
RTS
Out
3
RX
In
8
CTS
In
5
Ground
Ground
RS-232
Pin
Signal
Pin
Signal
2
T+
T+ RS422
7
T-
T- RS422
3
R-
R- RS422
8
R+
R+ RS422
5
Ground
Ground
RS-422
J11 - Digital Input/ Output
Pin
Function
Signal
1
AK1
Input Outo-
Coupler
2
AK2
Input Outo-
Coupler
3
VCC
Output 10-21
VDC
4
OP1
Open collector
Mosfet N
5
GND
Ground
J2 - External antenna -
Connect the external antenna delivered with the kit to the
J2 connector. Only antennas approved by Avire should be used in the installation,
otherwise the device might not function properly and may be damaged.
J3 - Battery
Pin
Function
Signal
1
+12
Positive
2
GND
Negative
J6 - Power Supply
Pin
Function
Signal
1
L
Live
2
N
Neutral
J8 - CANBus
Pin
Function
Signal
1
VCC
Unregulated
output
2
CANH
Bus CAN H
3
CANL
Bus CAN L
4
GND
Ground
J9/ J1A - Phone line (SLIC)
Pin
Function
Signal
1
L1
Tip
2
L2
Ring
Supply voltage:
100-240 VAC, 50/60 Hz
VCC
is an unregulated output 10-21 VDC + battery
support 10-14 VDC
